Wrap Pin Pendant

MSRP from

Our signature SkLO Large Wrap, a continuous wound length of the handblown Czech glass tube, is featured on the Wrap Pin Pendant. The glass element hangs from a brass “pin” element, made of a continuous ribbon of a brass bar, which opens and closes to allow for removal of the glass. The brass socket is suspended on an exposed fabric-wrapped electrical cord from the top of the “pin” and suspends the light bulb within the opening at the top of the glass. The “pin” element is available in two lengths.

glass color
new blue
silver mirror
steel blue
metal finish
brushed brass
brushed nickel
dark oxidized
polished nickel
cord color
drop length
fill in only the number

Lengths over 69 inches available at additional cost. State needed length in the notes section of your order, we will contact you with a quote.


Certifications UL listed suitable for dry and damp locations (US & Canada)
Socket 120V E26 60W Max
Drop length

Specify overall drop length – not field adjustable

Minimum overall drop lengths (no stem extension):

  • 18”/460mm (Wrap Pin 1.09)
  • 30”/765mm (Wrap Pin 1.21)

Lengths over the below available at additional cost:

  • 57”/1450mm (Wrap Pin 1.09)
  • 69”/1750mm (Wrap Pin 1.21)
Other info

LED bulb included

Standard canopy does not accommodate sloped ceilings or swagging of this light – other canopy options are available at additional cost – see Canopy Variants specification sheet under "Downloads" section on the Product Page

Requires recessed electrical box for installation

Fixture weights (approximate):

  • 6lbs/3kg (Wrap Pin 1.09)
  • 7lbs/3.5kg (Wrap Pin 1.21)

All glass dimensions are approximate – handblown glass dimensions vary by nature and intent

Made in the Czech Republic


18”/460mm Minimum Overall Drop Length 11”/280mm 11”/280mm 5”/127mm 5”/127mm 11”/280mm 11”/280mm Wrap Pin 1.09 30”/765mm Minimum Overall Drop Length (Shown with stem extension) (Shown with “pin” element only) (Shown with stem extension) (Shown with “pin” element only) 11”/280mm 11”/280mm 11”/280mm 11”/280mm 5”/127mm 5”/127mm Wrap Pin 1.21

About Wrap Pin Pendant

A new language

The Wrap Pin Pendant makes use of a new brass language developed by SkLO Design Partner, Karen Gilbert. “The ‘pin’ of the Hold Pin Pendant is a solid length of the flat brass bar, bent into an elongated loop which overlaps itself at the bottom,” says Gilbert. “This ‘pin’ secures the glass for the light. It is an entirely practical design solution presented in a way that is also decorative – the tension in the brass itself allows the ‘pin’ to open and close to secure and remove the glass. This functionality is elevated into something sophisticated, beautiful, and seemingly effortless. To achieve this requires a deep understanding of the materials used, both glass and metal. This is the kind of design we seek to achieve at SkLO.”


Your shopping cart is empty.