Hold Pin Pendant

MSRP from

An expressive glass vessel that appears to stretch under its weight serves as a shade in this pendant. The glass element here is different from that of the Hold Sconce and Hold Pendant in that is round and not flattened, and it is also of a different size. The glass element hangs from a brass “pin” element, made of a continuous ribbon of the brass bar, which opens and closes to allow for removal of the glass. The brass socket is suspended on an exposed fabric-wrapped electrical cord from the top of the “pin” and suspends the light bulb within the opening at the top of the glass. The “pin” element is available in two lengths.

glass color
new blue
metal finish
brushed brass
brushed nickel
dark oxidized
polished nickel
cord color
drop length
fill in only the number

Lengths over 74 inches available at additional cost. State needed length in the notes section of your order, we will contact you with a quote.


Certifications UL listed suitable for dry and damp locations (US & Canada)
Socket 120V G9 7W Max
Drop length

Specify overall drop length – not field adjustable

Minimum overall drop lengths (no stem extension):

  • 23”/585mm (Hold Pin 1.09)
  • 35”/890mm (Hold Pin 1.21)

Lengths over the below available at additional cost:

  • 62”/1580mm (Hold Pin 1.09)
  • 74”/1880mm (Hold Pin 1.21)
Other info

LED bulb included

Standard canopy does not accommodate sloped ceilings or swagging of this light – other canopy options are available at additional cost – see Canopy Variants specification sheet under "Downloads" section on the Product Page

Requires recessed electrical box for installation

Fixture weights (approximate):

  • 6lbs/3kg (Hold Pin 1.09)
  • 7lbs/3.5kg (Hold Pin 1.21)

All glass dimensions are approximate – handblown glass dimensions vary by nature and intent

Made in the Czech Republic


15”/380mm 23”/585mm Minimum Overall Drop Length 5”/127mm 6”/150mm Hold Pin 1.09 15”/380mm 5”/127mm 6”/150mm (Shown with stem extension) (Shown with “pin” element only) 15”/380mm Hold Pin 1.21 6”/150mm 5”/127mm (Shown with stem extension) 35”/890mm Minimum Overall Drop Length 15”/380mm 6”/150mm 5”/127mm (Shown with “pin” element only)

About Hold Pin Pendant

A new language

The Hold Pin Pendant makes use of a new brass language developed by SkLO Design Partner, Karen Gilbert. “The ‘pin’ of the Hold Pin Pendant is a solid length of the flat brass bar, bent into an elongated loop which overlaps itself at the bottom,” says Gilbert. “This ‘pin’ secures the glass for the light. It is an entirely practical design solution presented in a way that is also decorative – the tension in the brass itself allows the ‘pin’ to open and close to secure and remove the glass. This functionality is elevated into something sophisticated, beautiful, and seemingly effortless. To achieve this requires a deep understanding of the materials used, both glass and metal. This is the kind of design we seek to achieve at SkLO.”

Elemental expression

The glass element of the Hold Pin Pendant is a different version of the “hold” shape than that of the Hold Sconce or Hold Pendant, yet it shares that elemental expression of glass stretching as though molten. The Hold Pin Pendant’s two lengths of “pin” allow it to fit in spaces with high or low ceiling heights.


Your shopping cart is empty.