Sign In / Register

If you are a SkLO Dealer or Retailer, or a member of the Trade, you can create an account to access additional resources. Submissions will be reviewed and receive a response within one business day.

PEAK PENDANT
4.5″/110mm Whiskey and Neutral Gray textured glass, shown “on”

PEAK PENDANT
4.5″/110mm Whiskey textured glass, shown “on”

PEAK PENDANT
4.5″/110mm Whiskey and Neutral Gray textured glass, shown “off”

PEAK PENDANT
4.5″/110mm Clear textured glass, shown “off”

PEAK PENDANT
4.5″/110mm Steel Blue textured glass, shown “on”

PEAK PENDANT
4.5″/110mm Steel Blue textured glass, shown “off”

Peak Pendant

MSRP from
$1500
The Peak Pendant is a lit shape of handblown glass supported beneath a small conical form. The cone can be installed in either the pointing-up or pointing-down position. The ceiling canopy is an identical conical shape, mirroring the form of the pendant itself. The glass diffusers are available in two shapes and both "dipped" glass, featuring the SkLO double-dipped flame-polished mouth, and "textured" glass, featuring a soft, frosted finish and subtle sculpted vertical ridges. The Peak Pendant offers numerous possible configurations and personalities. It is not just one single pendant design, but many.

Minimum overall drop length 19 inches. Lengths over 49 inches subject to upcharge that will be calculated automatically.

Specifications

certifications UL listed suitable for dry and damp locations (US & Canada)
sockets Socket 120V G9 7W Max
drop length

Specify overall drop length – Rigid brass tube stems are not field adjustable

Minimum overall drop length is 19”/480mm

Lengths over 49”/1240mm available at additional cost

other info

LED bulb included

Standard canopy does not accommodate sloped ceilings or swagging of this light. Other canopy options are available at an additional cost. Visit the Accessories page using the link below to see available canopy options and review compatibility

This fixture is compatible with one or more of SkLO customizable multi-pendant canopy systems. Visit the Accessories page using the link below to see available systems and review compatibility

Requires recessed electrical box for installation

Fixture weights (approximate):

  • 4.5lbs/2kg (LT515)
  • 5lbs/2.25kg (LT516)

All glass dimensions are approximate – handblown glass dimensions vary by nature and intent

Made in the Czech Republic

Drawings

About Peak Pendant

Up or down?

Handblown glass diffusers of different shapes hang beneath brass cones. The standout feature of the Peak pendants is their ability to orient the cone element in either the upward- or downward-facing position. This ability, when combined with the different glass diffuser shapes, not only offers many possible compositions of this pendant fixture, but expands the possibilities for using the Peak pendants in groups and multiples. Suspended on rigid brass tube stems from a matching conical canopy, these pendants have sophisticated bold lines and classic form.

Glass shaped by hand

The glass shapes of the Peak Pendant are formed by hand, allowing them to be slightly imperfect to express their handmade origins. The “dipped” glass options feature an irregular, open mouth, created by double-dipping the piece into the molten glass crucible, followed by breaking the piece from the pipe and fire-polishing the opening – a purposeful expression of craft and the act of glassblowing. The “textured” glass diffusers have no opening. Their surface is frosted and features a subtle pattern of lines etched into the glass for a moody and classic look.

Shape and proportion

The Peak Collection is all about geometry and composition. The bold lines of the brass cones contrast with handblown glass shapes of the lit diffusers. Proportion is the key to each design in the Peak Collection, and every millimeter has been considered.